Do I need the rough in valve if I am just replacing exisiting bath fixtures? They are delta too. Thanks
A. The Delta T2751 requires rough in valves: R4707 for four hole and R2707 for three hole installations. If your current valves are one of these, then you would not need to replace it. All Delta valves are not universal with all of their trims.
I am installing this in a whirlpool tub, will I need a different rough in valve?
A. No, the Delta T2751 does not need a different valve for a whirlpool tub.
Is the faucet reach of 9.06" from the middle of the hole in the bottom of the faucet to the middle of the hole in the spout?
A. The spout reach is measured from the center of the spout's base to the center of the spout opening, which is 9-1/16".
What is the difference between a ceramic disk valve and a washerless cartridge valve (like this filler has)?
A. The Delta T2751 washerless valve is very common and easy to replace. These have plastic and brass parts inside to make the valve work. Whereas a ceramic disc valve has hardened ceramic discs inside which lasts much longer than a washerless valve. Both work great but the ceramic disc valves last much longer.
Does this faucet have a pop-up drain feature? The one with the hand shower appears to, but this picture does not show the lever for the drain on the tub filler spout.
A. The Delta T2751 does not have a pop up drain this is a roman tub faucet and they do not comes with drains. The one with a handshower shows a handle in the back of the faucet because that would be the diverter to the handshower.
What is the flow per minute?
A. The Delta T2751 has a 18 gallons per minute flow rate.
What is the faucet reach? I need a 10 to 11inch reach.
A. The Delta T2751 has a 9.06 spout reach.
Is there a hand held option with this Dryden tub faucet?
The Delta T2751 does not include a hand shower; however, the Delta T4751 is the Roman tub faucet with Hand shower option in this collection.