How to Install a Hot Water Dispenser
Installing a hot and cold water dispenser is easier than most think. By following this guide and your manufacturer's installation guide, you will be able to have instant hot water in no time.
Note: The steps are to give you a guide, but this video helps elaborate on the major processes.
Tools/Materials:Wrench, screwdriver or small drill, teflon tape, pencil, small level
Step by Step Instructions
Find a secure place to install the hot water tank under your sink.
Make sure the water tank is level.
Hang the water filter.
Start with the water valve from the wall. Connect the cold water from the faucet and connect a line to the dispenser.
Connect the filter to the supply lines' appropriate locations. One comes from the water supply and the other goes to a "T". This then hooks to the faucet and the tank.
Connect the faucet's copper lines to the filter very carefully.
Connect the last three hoses from the faucet to the water tank to their appropriate hook ups.
Test out your instant hot and cold water dispenser.