Iron-A-Way NE-342 Birch 42 Inch Built In Ironing Center

- Item #: BCI2438437
Originally $303.22, You Save 30%
Free Shipping!
26 In Stock
1 to 2 business days


Please select a finish

Earn 195 - 304 points with the purchase of this product Learn More

and earn 350pts

Questions about Iron-A-Way NE421AU?

Contact us for advice or more details. Our product specialists are here to help.

Configure your Iron-A-Way NE421AU 42 Inch Built In Ironing Center

  • Hinge

    • Please Select One
  • Swivel Option more info ►

    There is a Swivel option available for this product. Mouse over text for image of the option.
    • Please Select One


Please select a finish

$194.66 - $303.95

The Model NE-342 is just what you need if an electrical outlet is easily accessible. But with the same quality materials as our electric models. The NE-342 features a hot iron storage compartment. 42 inch ventilated steel ironing board and is available with an optional sleeve board.

42" Built In Ironing Center


  • Comes standard with birch veneer door.
  • The user can adjust height of board after installation with a 4" differential between a maximum and minimum height when the swivel option is chosen.
  • Ironing Board Cover and Pad are included.
  • The interior has been painted a cool gray.
  • Non-Electric - your power outlet is conveniently nearby.
  • Unit can be provided with a left hinged door (without garment hook) upon request. Right hinge is standard.
  • Piano hinge located on inside of door

Surface Mounting:

  • Unit may be surface mounted (unit extends approximately 6 7/8" into room) or recessed (unit extends approximately 3" into room) into any wall with standard 16 inch center studs.
  • See table in specification sheet to determine desired ironing board height above the floor. The user can adjust height of board after installation with a 4" differential between a maximum and minimum height.


  • Simple Install! Identify the location, cut and remove the drywall, slip the unit between the studs a nd attach it with the installation screws provided.
  • All models are pre-assembled and ready to install.
  • Fits between standard 2 x 4 studs on 16" centers. Install at the height of your choice, typically 34"-36" from the floor.


  • 120V, 15 Amps.
  • Pigtails are provided in bottom of wire way for hookup to supply line. Make entrance into knockouts provided in top and bottom of wire way through left-hand vent hole.


  • Swivel Option
  • Replacement Cover Pad
  • Electric Cord Wrap
  • Garment Bar
  • Hinge Hardware
  • Hot Iron Rest
  • Iron
  • Sleeve Board
  • Surface Mount Trim

Additional Iron-A-Way Links

Our SKU: Iron-A-Way NE-342

This product is listed under the following manufacturer number(s):

  • Iron-A-Way NE421AU
  • Iron-A-Way NE427AU
  • Iron-A-Way NE423AU
  • Iron-A-Way NE428AU
    No Door
  • Iron-A-Way NE422AU
  • Iron-A-Way NE425AU
  • Iron-A-Way NE429AU
  • Iron-A-Way NE4210AU
    White Panel

*Denotes a finish or option that has been discontinued

Iron-A-Way NE421AU Product Specifications

Installation Guide
E-342/NE-342 Specifications
Bulb Included No
Configuration Ironing Center
Country Of Origin USA
Electric No
Includes Timer No
Installation Type Recessed
Ironing Board Length 42
Made in America Yes
Optional Sleeve Board Yes
Overall Depth 7.375
Overall Width 15
Swivel Board Yes

Installation Resource Center

Whether you are installing the product yourself or hiring a professional, our installation Resource Center has everything you need to get your project done. Visit the Installation Resource Center to get started.

Iron-A-Way NE-342 Reviews

Rated 2 out of 5 by from Too Small Iron Storage The cabinet is well built and I love the drop down ironing board. However the main reason I invested in this cabinet was to have a place to store my iron with my board. The shelf provided for the iron is too narrow for today's irons. Unfortunately, I didn't realize this until after I installed the cabinet. If you try to put the iron on the shelf, the ironing board does not have enough space to fold into the cabinet to close the door. Now I have the problem of what to do with a hot iron. This cabinet would be perfect if the manufacturer reworked the iron shelf to accommodate the width of today's irons
Date published: 2012-07-04
Rated 5 out of 5 by from Great Product I love this ironing board. I have a place to put my iron and the board is no longer sitting out all the time.
Date published: 2011-07-28
Rated 4 out of 5 by from Good product Nice board with a good cover, easy to open and close. I am glad I got the swivel feature. Does NOT accommodate a large iron! Door arrived a little chewed on one edge but since I am painting it, it's OK.
Date published: 2012-03-01
  • How tall and wide is it?

    A. The overall dimensions for the Iron-A-Way NE-342 is (height)47 7/8" x (width)15".

  • I can have hinge on the right side because of obstruction on left side. Will the door fold back 90 degrees so I can iron from the right side?

    A. You can choose which side you would like the hinge.

  • Is the hot iron storage the same as the hot iron rest?

    A. The hot iron storage and the hot iron rest are two different things. The storage is included in this ironing center. It is that top shelf where the iron is pictured in the image. The hot iron rest must be purchased separately as Iron-A-Way IAW-HotIronRest. It will go on that bottom shelf and is ideal for use when you need to set the iron down temporarily while ironing.

  • Is there a plug in the Iron a way unit to plug the iron in?

    A. The Iron-A-Way NE-342 is the non electrical version. The E-342 will have the electrical outlet.

  • Is there room for the iron cord when storing?

    A. The Iron-A-Way NE-342 ironing center can use the Iron-A-Way IAW-ElectricCordWrap accessory to hold the iron cord in place when storing or using the iron.

  • Does the following product info mean you can install an electrical outlet in this unit..."Pigtails are provided in bottom of wire way for hookup to supply line. Make entrance into knockouts provided in top and bottom of wire way through left-hand vent hole."?

    A. The Iron-A-Way NE-342 is the non electical version. You can get the E-342. That will have the built in electrical outlet.

  • Does the door need to swing open entirely(180 degrees) to use the ironing board?

    A. The Iron-A-Way NE-342 42" Built In Ironing Center needs to have the door open at least 90 Degrees to be able to pull the board out of the cabinet.

  • Can this product be attached to wall or does it have to br recessed?


    The Iron-A-Way NE-342 can be surface mounted or recessed installation. A trim kit is recommended when surface mounting.

  • Will the door open 180 degrees?


    The Iron-A-Way NE-342 door will open 180 degrees.

  • How deep is it?


    The Iron-A-Way NE-342 depth is 7.375".

  • How far does the door need to open for the swivel feature to work?


    The Iron-A-Way NE-342 door opens approximately 180 degrees.  Iron-A-Way suggests allowing at least 16 inches to the side of the unit for door to swing open properly.

Buy the Iron-A-Way NE421AU in Birch at Research Iron-A-Way NE421AU in Birch online. Find Iron-A-Way NE421AU in Birch features and specifications. Get the best deal by comparing the Iron-A-Way NE421AU in Birch today.

Recently viewed items
× Shipping Rates & Methods

The cost to ship items varies by item, shipment and shipping option.

Free Ground Shipping on Orders Over $49 *

Standard ground shipping transit time is 5-7 business days.

Free Freight Shipping on Orders Over $1500 *

Curb side delivery (also called freight or "LTL" shipping) is reserved for large, heavy, or oversized items like chandeliers, bathtubs, shower doors, etc. Items are palletized and loaded onto a large truck for shipment, and delivered to your curb by scheduled appointment. Transit time is 7-10 business days.

* For exact shipping costs, add the product(s) to your cart and enter your zip code. All offers pertain to the lower 48 states and do not include deliveries to Alaska, Hawaii or Canada.

Learn more about shipping rates and policies