What is the depth of the round scooped-out areas on the opposing faceplates for fingers to reach into (e.g., 5/8", 6mm, etc.)?
A. According to Kwikset the 335 depth of the "scooped-out" area is approximately 1/4" or .25".
Is there an emergency release on the other side of the lock?
A. Yes, since this is a privacy lock it will have the emergency key hole release on the exterior knob. That will be able to be released using the privacy pins that are included with the lock.
will it work on double pocket doors, or converging pocket doors?
A. The Kwikset 335 is meant for use for locking a single pocket door.
could you use this on a existing interior bathroom door being transformed into a pocket door? hardware knob hole for current door will be taken off and replaced with this product..will this work?
A. The Kwikset 335 will work the place of you existing door so long as it has a standard bore hole (2 1/8"). Hope this helps!
Does it lock from both sides?
A. The Kwikset 335 is a Privacy lock, which only locks from one side.
Can this lock be turned around depending on the direction of the door opening? Or does it need to be ordered specifically for the direction?
A. The Kwikset 335 is designed for a sliding door, and can go in either direction.
How do you grab the door to open it if it is completely pushed back between the walls?
A. The little bronze latch coming off of the silver cylinder latch pops out like that to give your fingers a grip to pull the door out.
Is the latch plate included in this product, or does it need to be bought separately ? If so, what plate unit is required ?
A. This will include the latch plate, as well as the strike plate. You will not need any additional parts.
Is there a keyed version of this lock? I would like to secure a room behind a pocket door with a key for more security. Thank you.
A. The Emtek 2103 is a keyed pocket door lock, Kwikset doesn't have a keyed pocket door lock.
Is there a latch for a pocket door with a 2 3/4 backset and 2 1/8 diameter?
A. The pocket door privacy latches are only available for a 2 1/8" backset.
I'm looking for the matching Round Flush Pull. Since I've a double pocket doors. So I can have the lock on one side and just a round pull on the other. PLease LMK if you sell it.
A. Kwikset does not have anything like that I would recommend the FP221R from Deltana instead.
What is the size of the strike plate in the jamb?
The Kwikset 335 strike plate is 2 1/4" L x 1" W with rounded corner.