Lithonia Lighting Surface Mount 2-Light Fluorescent Ceiling Fixture with Indirect Lighting Diffuser

INTENDED USE — For general area lighting or task-specific illumination in both new construction and remodeling applications. Especially suited for conference rooms, reception areas, health care institutions, educational facilities and offices. Certain airborne contaminants can diminish integrity of acrylic.

Features:

• CONSTRUCTION — Rugged universal 4’ steel channel provides platform for reflector/diffuser module. A tandem unit is an 8’ channel with two 4’ reflector/diffuser modules. Joiners and finished ends are injection molded from tough ABS/PC blend with integral Avante white color.
• All diffusers snap into place by pivoting on joiner/light trap for easy lamp access.
• Injection molded joiners at each end allow fixtures to be field joined or completed as individual units with snap-on finished ends.
• OPTICS — Down light, solid (DLS) reflector finished in high reflectance matte white polyester powder paint provides uniform light distribution. DLS is available with aluminum stepped reflector (ASR).
• Up light, round hole perforated band (ULR) reflector finished in high reflectance matte white polyester powder paint has uniform light distribution with up light accent provided by 1-3/8” wide perforated band just above lamps.
• All diffusers shield lamps from direct view.
• Metal diffuser staggered round holes (MDR) 52% open perforated metal with .075” diameter holes backed with white acrylic diffuser.
• Metal diffuser aligned mini slots (MDM) 46% open perforated metal backed with white acrylic diffuser.
• Straight blade louver (SBL) sides of perforated metal with staggered round holes and solid blade louvered center. Sides and louver backed with white acrylic diffuser.
• ELECTRICAL — All ballasts supplied are class P, thermally protected, resetting, HPF, non-PCB, UL Listed, CSA Certified. Energy saving and electronic ballasts are sound rated A. Standard combinations conform to UL 935.
• INSTALLATION — AVSM can be directly mounted to most ceiling surfaces. Clips provided with fixture for surface mounting on tee bar in grid tiled ceilings. With mounting accessories, fixtures can be close to ceiling stem mounted or cable mounted up to 144”. Fixture must be supported every 4’. Refer to the accessories tab for information on mounting configurations and limitations. Consult National Electrical Codes specifications for through wiring limitations.
• LISTINGS — UL Listed to US and Canadian safety standards
• WARRANTY — 1-year limited warranty

Specifications:

• Product Dimensions: 48"L x 12"W x 4-3/8"H
• Number of lamps: 2
• Lamp Wattage (per bulb): 32
• Diffuser Style: Metal diffuser, Round holes
• Voltage: 120V/277V Universal ballast
• Ballast type: Electronic, less than 10% THD, instant start