How far from the ceiling must this fan be installed?A.
The MinkaAire Wave includes a 6" down rod. This will be the shortest length from the ceiling it can be installed.
Can you buy additional downrods and do the two included connect together?A.
The MinkaAire Wave includes two down rods that connect together and additional down rods may be purchased.
Does this fan go in reverse?A.
The MinkaAire Wave does have a reverse function.
How much does this fan weigh?A.
The Minka Aire Wave fan weighs approximately 13lbs
What material are the blades made of?A.
The blades for the MinkaAire Wave are made of a composite poly material.
can this fan be used with a hard wired wall switch with speed controlA.
The MinkaAire Wave could be hard wired to a 3 speed wall control.
Can this fan be mounted from an 8" ceiling height? What is its shortest height?A.
The MinkaAire F843 ceiling fan hangs at a minimum height of 14.25" from the ceiling to the lowest point on the fan (10.25" from the ceiling to the blades). It includes one 6" downrod and one 4.5" downrod so you can customize the height. Minimum ceiling height for regular installation is 93.5" (7' 9.5"). If your ceiling is 8 feet, it will accommodate the fan without any trouble.
We have 12 foot ceilings. What length of rod should I use?A.
For a 12 ft ceiling a 24" downrod should be used. Then it will bring the fan down to 10 foot height which is a common height because it provides clearance but also good air flow.
Can this be used on a covered desk?A.
The MinkaAire Wave is meant for dry locations, which will only work for a covered (not enclosed or moisture controlled) deck if your local humidity levels remain low. Higher moisture levels can cause damage to products not rated for at least damp locations.
Buy the MinkaAire F843-WH in White at Build.com. Research MinkaAire F843-WH in White online. Find MinkaAire F843-WH in White features and specifications. Get the best deal by comparing the MinkaAire F843-WH in White today.