Can it be used with the A720 shower arm diverter?
The Moen 3867 will work as long as the connection is a 1/2". The A720 is threaded and a 1/2"

This product has additional required/recommended options. To configure, add to your cart.
From finishes that are guaranteed to last a lifetime, to faucets that perfectly balance your water pressure, Moen sets the standard for exceptional beauty and reliable, innovative design.
This product is listed under the following manufacturer number(s):
*Denotes a finish or option that has been discontinued
The Moen 3867 will work as long as the connection is a 1/2". The A720 is threaded and a 1/2"
The Moen 3867 is threaded on both ends for proper installation. Cutting the slide bar is not advised as it will void the warranty and may prevent proper installation.
The Moen 3867 is a slide bar for the hand shower. It is not recommended to be used as a ADA approved hand bar.
The hose has a vacuum breaker that allows you to connect your shower arm.
You should be able to use any 1/2" elbow.
The Moen 3867 bracket doesn't rotate, but acts like a holder for the hand shower.
The Moen 3867 can be used with a posi-temp tub spout as long as the tub spout has a diverter.
The Moen 3867 is only slightly adjustable but not to any degree, it is a fixed holder.
The Moen 3867 has a water stop in it. You do not need any silicone.
The Moen 3867 does require a handle trim and valve to operate it. This would need to be purchased separately.
You can order the handshower and hose seperately. The part number for the handshower is 128875 and the hose is A726.
The Moen 3867 has a metal slide bar. The parts that attach to it are plastic.
The wall supply elbow that is recommended for the Moen 3867 is the Moen A725.
The Moen 3867 can be used with any shower system you wish. That would be fine.
The Moen 3867 is adjustable.
The Moen 3867 does not include any rough in valves. It can be used with either a pressure balance or a thermostatic set-up.
Yes,the Moen 3867 handheld shower is able to be removed from the slide bar.
From center to center of the mounting brackets the slide bar is 30-5/8".
No, what you would have to get is a shower arm mount for your handheld. Try the Alsons 3401.
The Moen 3867 replacement slider is the Moen 137034.
The Moen 3867 connects to the wall with non metallic brackets but very sturdy.
The Moen 3867 slider rotates to adjust direction of spray.
The Moen 3867 is will need the valve trim and rough in valve as well. What finish were you going for?
The Moen 3867 is not specifically part of the Eva collection, but it will match nicely with the Eva collection.
The Moen 3867 is just an outlet and is not dependent on any handle or valve combination. You can use absolutely any pressure balanced system you wish. We recommend staying with Moen to ensure matching finishes. The TS2141 and the 2510 valve are part of the coinciding collection, though.
The Moen 3867 has a 5/8" diameter
On the Moen 3867, the elbow and hand shower are plastic. The rest of it is constructed from metal parts.
The Moen 3867 will require the Moen 3372 diverter valve to divert the water from the shower head to the handheld shower.
Yes, the Moen 3867 is ADA compliant.
The Moen 3867 is able to be adjusted on the slide bar. The angle of the spray can be adjusted, as well as, moved up and down on the slide bar.
The Moen 3867 is the standard flow rate 2.5 GPM while the 3867EP is the eco performance, low flow option, 2.0 GPM.
| ADA | Yes |
|---|---|
| Connection Size | 0.5 |
| Flow Rate (GPM) | 2.5 |
| Handshower | Multi Function |
| Height | 30.625 |
| Hose Included | Yes |
| Pause Control | No |
| Showerhead Height | 10 |
| Showerhead Width | 4.8125 |
| Slide Bar Included | Yes |
| Spray Pattern | Full, Jet, Massage, Vigorous |
| Spray Settings | 4 |
| Theme | Transitional |
| Wall Supply Included | No |
| Width | 5.875 |
Like many retailers, Build.com can choose to set its own prices independently. And even though manufacturers require Build.com and other retailers to display a product's "minimum advertised price" (or MAP), the retailer can choose to sell for less than that. But the price must be conveyed in other ways, and each individual manufacturer's MAP policy determines where the price can be seen.
To see the price for this product at Build.com, you'll need to place it in your shopping cart, and maybe even proceed to final checkout. If you're not ready to buy the product, simply remove it from the cart.
Build.com apologizes for any inconvenience. We'd just like to offer you the chance to save extra money while we adhere to manufacturers' MAP policies. Build.com is also working to educate manufacturers on how their policies impact customers and their buying behavior.
© 2000-2013 Build.com, Inc..
All Rights Reserved.
Build.com is a
Build.com, Inc Network Store