Does this handle have a lock? If not, is there a matching lock that I can order?
A. The Omnia 653 is not a locking unit and unfortunately there is not a matching locking unit.
Is this simply a friction fit or is there a tiny finish nail?
A. The Omnia 653 is going to have a finish screw on the inside of the handle.
can I use this pull for a swing/hinge door?
A. The Omnia 653 can be used as s swing pull.
I have a sliding pocket door. Do I need to order two handles separately or do they come in a package of 2?
A. The Omnia 653 is just one piece, so you would need to order one for each side of the door.
How many of these do I need for a double pocket door so that we have two flush on each side? Also they are standard hollow pocket doors which are slightly more than an 1 and 1/4 thick. Will these work or do I need other ones? thanks.
A. You will need a 4 of the Omnia 653 if you are using them on two doors. These will work for your door thickness.
What is the projection?
A. The Omnia 653 is a flush pull which means it mounts flat on the edge of the door. Thank you for your question!
What are the cut out dimensions? Can I cut all the way through the door for a back to back mounting application?
A. The Omnia 653 is to be cut to 1 x 3/4 x 1/2 (height x width x depth). The manufacturer does not recommend cutting through the door for back to back application but if you need to do so for your set-up we recommend speaking with a contractor prior to cutting your door.
Buy the Omnia 653 US15 in Satin Nickel at Build.com. Research Omnia 653 US15 in Satin Nickel online. Find Omnia 653 US15 in Satin Nickel features and specifications. Get the best deal by comparing the Omnia 653 US15 in Satin Nickel today.