Rinnai 3" Inner Diameter - Direct Vent Pipe - Double Wall - Raised Horizontal Termination Kit (Snorkel) for Condensing Tankless Water Heaters

Raised Horizontal Termination Kit (Snorkel) for Condensing Tankless Water Heaters

The Rinnai 224047PP raised horizontal termination kit is to be used when the venting will terminate horizontally, and the termination is less than 12 inches above the snow level. A termination of at least 12 inches above snow level is required, and this raised horizontal termination kit will raise the termination between 23.5-31.5 inches.

Plastic Outer Vent For Intake

• Easy To Cut Compared To Stainless Steel
• Dent And Impact Resistant
• Corrosion-Proof
• Non-Flammable Material (ul94-V0)
• Seamless Extruded Materials
• Casted Elbows And Adapters
• White Semi-Gloss Finish (Eu Ral 9016)

Polypropylene Inner Vent For Exhaust

• Easy To Cut Compared To Stainless Steel
• Stable, Thick-Walled Material
• Dent And Crease Resistant
• Not Affected By Scratches
• Seamless Extruded Material
• No Weld lines
• Thick-Walled, Casted Elbows And Adapters
• Lightweight
• Seal Rings With Maximum Temperature 400°F (Approx. 200°C)

Features:

• GSA Approved
• Zero Clearance To Combustibles
• Engineered Especially For Gas Appliance Venting
• Positive Fit And Lock Allows For Installation Assurance
• Two Layers Of Pipe Equals Two Layers Of Protection
• Seals At Every Joint Expand And Contract With Weather And Temperature Changes, So There's No Flexing Or Cracking In The Venting
• No Flammable, Messy Or Harmful Glues, Cements, Or Solvents Are Used
• Single Penetration Through Wall For Both Intake And Exhaust
• Professional Installation Recommended

For Rinnai Certified Installation:

Contact Rinnai at 844-348-4715