This product has additional required/recommended options. To configure, add to your cart.
Interior Handle Required
Camelot Single Cylinder Exterior Entrance Handleset from the F-Series
The distinctive design of the Camelot combines architectural inspired arches with graceful curves. The two-piece design offers flexibility for doors with non-standard hole locations while providing a classic appearance for smaller entranceways.
Replaces virtually any existing lock
Easy installation: One-person project; no extra hands needed
ANSI Grade 1 with maximum security features
Lifetime finish and mechanical guarantee
Designs and finishes to match any home's architectural style
Utilizes the new B-Series deadbolt with increased security and easier installation!
1/2" of bolt left in housing when bolt is thrown for added kick-in resistance.
Integrated anti-pick shield with Snap & Stay™ self adjusting tension provides added security and simplifies installation
1" Edge bore door preparation required for larger bolt housing
Zinc bolt has hardened steel pin inside that spins in response to sawing attacks which prevents cutting or sawing
Bolt diameter is 10% larger than typical bolts for maximum kick-in resistance
Adjustable backset with the industry's only helical design that locks into place with no adjusting during installation
Works for both 2-3/8" and 2-3/4" backsets.
ADA compliant thumb turn
Faceplates (Part 12-326): Supplied with 1/4" Round Corner, Square Corner and Drive-In Faceplates
Strike Plates (Part 10-269): Supplied with a Round Corner Deadbolt Strike (10-116), Square Corner Full Lip Strike Plate (10-026) and Round Corner Full Lip Strike Plate (10-027) with Dimensions of 2-1/4" x 1-5/8"
Note: New interior packs will not work with old exterior packs. New exterior handlesets will not work with old interior packs.
Whether you are installing the product yourself or hiring a professional, our installation Resource Center has everything you need to get your project done. Visit the Installation Resource Center to get started.
Schlage F58-CAM Reviews
Rated 4 out of
it looks great and works great the only thing is that you should sell as a set and not have to buy 2 handles it should be one not the dead bolt and then the handels
Date published: 2012-07-17
Rated 5 out of
Very nice productWhen purchasing via online, visual and tactile shopping is difficult when trying to make an informed purchase. I spent some time in research and gathering information to make a correct choice. After receiving and installing this handleset, we are very inpressed with this product. It is a very sturdy handset with an extremely smooth operation. The install was a snap, being very easy to understand instructions and looks very actractive with my new door. If I am to say anything that is not positive: it would be that only time will tell just how the finish will hold out in the months to come but at this point, it looks to be a very quality finish and we have high hopes for it's future.
All in all, this is a quality handleset and we are very pleased with the Schlage quality and would surely purchase again in the future from Schlage AND HANDLESETS.COM.
Date published: 2013-02-05
Rated 5 out of
Handleset arrived quickly and looks great.
Date published: 2010-10-28
Rated 5 out of
Schlage F58-CAMExactly what we wanted, looks great on door. Nice quality and easy assembly. Excellent customer service.
Date published: 2011-05-06
Rated 5 out of
great purchaseLOVE this lock and handle. It's a wonderful, heavy, well made set etc. The only caveat I have is that the seller did not emphasis that the door has to be of a certain width/weight or the lock does not function as well. I bought two of these locks for two different doors, and on the heavier door the lock works splendidly. All said, I'm buying a heavier door to fit the second lock
Date published: 2012-11-22
Rated 1 out of
horrible lockSchlage F58 -CAM lock and handel set i replaced product with same style, model number. holes don't line up, have to grind down new plates or the wood in door. I have replace 4 schlage entry way handle and lock sets in 5 years. holes always need to be adjusted. NOT to mention having the actual dead bolt stop working. keys get stuck, or just turn and don't unlock bolt. or the best is when you can't get key in at all. Got trapped in house once because handle on back stop moving bolt. I really thought I was buying quality merchandise. especially for the Price. But now I am stuck unless I change the door completely,
aggravated to no end.
Date published: 2013-09-19
Rated 4 out of
HopefulUp to now is working perfectly well. It has only been about two months since we installed it. It was easy to install. It looks great!
I had read some bad reviews. They said that after 6 months of use, it broke. They order the same one and it broke again. Hopefully that will not happen with ours. I couldn't find another style that I liked.
Date published: 2012-11-28
Rated 5 out of
SchlageSchlege locksets are the best we have found for the money. Build.com made it easy to have them keyed alike when we ordered.
A. The difference between the Schlage F58-CAM and the F62 is the cylinder. The F58 is single cylinder and the F62 is the double cylinder.
What is the dummy for f60sk v cam 505 acc 605?
A. The Schlage F58-CAM dummy would be F170-ACC-LH or F170-ACC RH.
Does the Schlage F58-CAM come with SecureKey?
A. The Schlage F58-CAM is not a securekey. But the Schlage F58-CAM-SK is it's securekey version.
Does this have two locks? A deadbolt and one on the handle? If not can you direct me to a product that does.
A. This item is only keyed on the deadbolt. Sounds like you need a 2-point lock like the Kwikset Gibson, # 553-GN-LIP-S.
Does this new handle come with an interior knob or does it come with a lever?
A. The Schlage F58-CAM comes with either a knob or a lever. You can actually choose the interior pack you would like. To choose the interior pack, simply add the item to the cart. The next page will ask you to configure the item. Please let me know if I can be of any further assistance. Thank you.
WHAT IS THE CODE FOR A RIGHT HANDED SCHLAGEF58 AND HOW CAN YOU TELL?
A. The Schlage F58-CAM will not need handing specified, The interior pack, that will require handing. The RH numbers will be the right handed ones. The left handed versions have LH at the end.
can you explain single, double or dummy cylinder for front entry door?
A. Single means one side has a keyed entry while the other has a thumb latch. Double means there is a keyed entry on both sides and Dummy means it is not real (double doors/ French doors).
IS THE DUMMY HANDLE FOR THE F58 THE F92?
A. The Schlage F58-CAM will go with the dummy version, F92-CAM.
What interior pack do I need to purchase to go with this Schlage F58-CAM handle set?
A. When you add this item to your cart, it will list the available interior packs.
What is the length of the F-58 Camelot Handleset?
A. The Schlage F58-CAM is 8-1/2" center to center.
Can deadbolt be keyed by code stamped on key?
A. The Schlage F58-CAM can be keyed alike to a current Schlage handle set.
I have double entry doors. Which dummy handleset do I need to match outside and in? I see under other viewed the F392 Cam and the and the F92 cam. Is it one of these and what is the difference?
A. You will want to use the F92-CAM to match up with the F58-Cam. Make sure you choose the interior packs from the same series so the interiors match as well.
Left Handed - Right Handed - may I assume from the inside, door hinged on the left that this is "left handed"?
A. Determining handing is done by standing on the Outside of the door and looking to see what side the hinges are on. If from the outside, the hinges are on the left, you need a left handed set.
For a visual go to the web address below and scroll down to Handing : http://www.handlesets.com/index.cfm?page=browse:category&categoryID=4823
What is the depth of the handleset from the face of the door?
A. The Schlage F58-CAM protrudes 2.75" from the face of the door.
What is the deadlatch id # for F60 cam 609 geo?
The Schlage 16-203 deadlatch will work for the F58-CAM.
Will the Interior Pack F59-ACC-CAM work with this exterior F58-CAM Exterior Handle set?
The Interior Pack F59-ACC-CAM is compatible with the exterior pack F58-CAM.
Can the Schlage F58 cam work with an electric strike?
The Schlage F58-CAM would work with an electric strike.
Buy the Schlage F58CAM716 in Aged Bronze at Build.com. Research Schlage F58CAM716 in Aged Bronze online. Find Schlage F58CAM716 in Aged Bronze features and specifications. Get the best deal by comparing the Schlage F58CAM716 in Aged Bronze today.
The cost to ship items varies by item, shipment and shipping option.
Free Ground Shipping on Orders Over $49
Standard ground shipping transit time is 5-7 business days.
* This offer excludes deliveries made to Alaska and Hawaii.
Free Freight Shipping on Orders Over $1500
Curb side delivery (also called freight or "LTL" shipping) is reserved for large, heavy, or oversized items like chandeliers, bathtubs, shower doors, etc. Items are palletized and loaded onto a large truck for shipment, and delivered to your curb by scheduled appointment. Transit time is 7-10 business days.
* For exact shipping costs, add the product(s) to your cart and enter your zip code.