Schlage F62-CAM-SIE Double Cylinder Entrance Handleset with Interior Siena Knob from the Camelot Collection
The distinctive design of the Camelot combines architectural inspired arches with graceful curves. The two-piece design offers flexibility for doors with non-standard hole locations while providing a classic appearance for smaller entrance ways.
- Camelot double cylinder handle set with Siena Interior Knob
- The deadbolt is thrown or retracted by a key from either side.
- Door latch is retracted by a thumb piece from the outside or by the inside lever
- Bolt automatically deadlocks when it is fully thrown.
- Installation should be in accordance with existing codes only, to ensure life safety emergency egress.
- For Right or Left handed applications
- Solid Brass Exterior Trim
- Wrought Brass Interior Trim
- Lifetime Limited Mechanical and Finish Warranty
- Exterior Handleset Height: 12-7/8" without the deadbolt
- Exterior Handle Projection: 2-7/8"
- Interior Knob Diameter: 2-9/16"
- Interior Rose Diameter: 2-3/4"
- Interior Knob Projection: 2-3/8"
- Utilizes the new B-Series deadbolt with increased security and easier installation!
- 1/2" of bolt left in housing when bolt is thrown for added kick-in resistance.
- Integrated anti-pick shield with Snap and Stay self adjusting tension provides added security and simplifies installation
- 1" Edge bore door preparation required for larger bolt housing
- Zinc bolt has hardened steel pin inside that spins in response to sawing attacks which prevents cutting or sawing
- Bolt diameter is 10% larger than typical bolts for maximum kick-in resistance
- Adjustable backset with the industry's only helical design that locks into place with no adjusting during installation
- Works for both 2-3/8" and 2-3/4" backsets.
- ADA compliant thumb turn
- Faceplates (Part 12-326): Supplied with 1/4" Round Corner, Square Corner and Drive-In Faceplates
- Strike Plates (Part 10-269): Supplied with a Round Corner Deadbolt Strike (10-116), Square Corner Full Lip Strike Plate (10-026) and Round Corner Full Lip Strike Plate (10-027) with Dimensions of 2-1/4" x 1-5/8"
Note: New interior packs will not work with old exterior packs. New exterior handlesets will not work with old interior packs.
- Old F358 - New F58
- Old F359 - New F59
- Old F362 - New F62
- Old F392 - New F92
- Old F394 - New F94
Additional Schlage Links
This Schlage item can also be referenced by the following color/finish specific model #:
- Schlage F62CAM716SIE
- Schlage F62CAM609SIE
- Schlage F62CAM620SIE
- Schlage F62CAM505SIE
Lifetime Polished Brass
- Schlage F62CAM613SIE
Oil Rubbed Bronze
- Schlage F62CAM605SIE
- Schlage F62CAM619SIE
*Discontinued model or finish
Discover the best online deals for the F62-CAM-SIE and everything else for your home from the leading online home improvement store.
We're committed to providing you with the best assortment of Schlage products with over 400 warehouses across the country.