Schlage F62-CAM-SIE Double Cylinder Entrance Handleset with Interior Siena Knob from the Camelot Collection
The distinctive design of the Camelot combines architectural inspired arches with graceful curves. The two-piece design offers flexibility for doors with non-standard hole locations while providing a classic appearance for smaller entranceways.
- Camelot double cylinder handle set with Siena Interior Knob
- The deadbolt is thrown or retracted by a key from either side.
- Door latch is retracted by a thumb piece from the outside or by the inside lever
- Bolt automatically deadlocks when it is fully thrown.
- Installation should be in accordance with existing codes only, to ensure life safety emergency egress.
- For Right or Left handed applications
- Solid Brass Exterior Trim
- Wrought Brass Interior Trim
- Lifetime Limited Mechanical and Finish Warranty
- Exterior Handleset Height: 12-7/8"without the deadbolt
- Exterior Handle Projection: 2-7/8"
- Interior Knob Diameter: 2-9/16"
- Interior Rose Diameter: 2-3/4"
- Interior Knob Projection: 2-3/8"
- Utilizes the new B-Series deadbolt with increased security and easier installation!
- 1/2" of bolt left in housing when bolt is thrown for added kick-in resistance.
- Integrated anti-pick shield with Snap and Stay self adjusting tension provides added security and simplifies installation
- 1" Edge bore door preparation required for larger bolt housing
- Zinc bolt has hardened steel pin inside that spins in response to sawing attacks which prevents cutting or sawing
- Bolt diameter is 10% larger than typical bolts for maximum kick-in resistance
- Adjustable backset with the industry's only helical design that locks into place with no adjusting during installation
- Works for both 2-3/8" and 2-3/4" backsets.
- ADA compliant thumb turn
- Faceplates (Part 12-326): Supplied with 1/4" Round Corner, Square Corner and Drive-In Faceplates
- Strike Plates (Part 10-269): Supplied with a Round Corner Deadbolt Strike (10-116), Square Corner Full Lip Strike Plate (10-026) and Round Corner Full Lip Strike Plate (10-027) with Dimensions of 2-1/4" x 1-5/8"
Note: New interior packs will not work with old exterior packs. New exterior handlesets will not work with old interior packs.
- Old F358 - New F58
- Old F359 - New F59
- Old F362 - New F62
- Old F392 - New F92
- Old F394 - New F94
Additional Schlage Links
Our SKU: Schlage F62-CAM-SIE
This product is listed under the following manufacturer number(s):
- Schlage F62CAM716SIE
- Schlage F62CAM609SIE
- Schlage F62CAM620SIE
- Schlage F62CAM505SIE
Lifetime Polished Brass
- Schlage F62CAM613SIE
Oil Rubbed Bronze
- Schlage F62CAM605SIE
- Schlage F62CAM619SIE
*Denotes a finish or option that has been discontinued
Schlage F62CAM619SIE Product Specifications
|BHMA Certification||Grade 2|
|Backset||2-3/4", 2-3/8", Adjustable 2-3/8" or 2-3/4"|
|Center to Center||5.5|
|Cylinder||5 Pin Schlage C|
|Door Thickness||1-3/4", 1-5/8", 1-7/8", 2"|
|Function||Double Cylinder, Double Cylinder Handleset|
|Grip Center to Center||8.5|
|Handing||Left, Reversible, Right|
|Interior Handle Style||Knob|
|Latch Faceplate||Drive-In, Round Corner, Square Corner|
|Lock Style||Single Point|