Schlage M-Series High Security Electromagnetic Gate Lock

M-Series 1500 Lb Hold Force High Security Electromagnetic Gate Lock

The Schlage M490G Electromagnetic Gate Lock is a weather resistant electromagnetic lock with 1500 lbs of holding force, designed for use on all types of sliding and swinging gates. As a high security magnetic lock, it can accommodate misalignment problems while supplying superior holding force.

A 1/2" compression connector is provided for installation of 1/2" EMT conduit, insuring protection of hook-up wiring from weather and vandalism. Heavy duty plating resists corrosion of mating surfaces, providing a low-maintenance locking device.

A modified Top Jamb mounting bracket allows a single M490G to be mounted in a variety of positions. The M490G Gate Lock may be mounted to any gate frame or post. Special brackets may be required to adapt the lock to a particular frame or post. It is important that the lock is mounted so that the armature pulls straight back from the magnet face.

TheM490G can be field configured for either 12 or 24 VDC operation. Magnetic Bond Sensor (MBS) and Gate Status Monitor (DPS) are standard.

Schlage electromagnetic locks are used to secure the door in conjunction with push bars, request-to-exit devices, or credential readers for fail-safe applications when code compliance permits. You can use them on a single standalone door or as part of an access control system. Electromagnetic locks do not contain moving parts, making them extremely durable and preferred for high security applications. Electromagnetic locks consist of an armature and a coil assembly, which become magnetized when an electric current passes through them. This magnetic field secures the door. Electromagnetic locks are fail-safe by design. To unlock the door simply remove power.

Features:

• 1500 lbs of direct holding force
• Magnetic Bond Sensor (MBS) and Gate Status Monitor (DPS)
• Field selectable 12 or 24 VDC operation
• Built-in voltage spike suppressor
• Electroless nickel plated finish
• Universal mounting brackets
• 1/2" EMT compression fitting
• Two foot wire leads
• Weather resistant for exterior use
• Accommodates gate misalignment
• No moving parts - low maintenance

Specifications:

• Meets or exceeds BHMA standard of 1500lb holding force
• 12/24 Input Voltage (Field Selectable)
• Current draw: 0.65 amps in 12 volt operation, 0.35 amps in 24 volt operation
• Height: 3"
• Length: 11"
• Width: 1-3/4"
• Temperature: 32-120F (0-49C)
• Wire Gauge: 14-22 AWG

Schlage has a rich heritage in electronic security. For years we have led the industry by providing a broad portfolio of solutions to meet the diverse needs of the market. Today, our electromagnetic locking portfolio continues to evolve to meet your changing needs.