Fanimation FP4620SN Zonix 3 Blade 54" Ceiling Fan - Blades and Wall Control included

- Item #: BCI1324070

Offer Ends


We still have product details, accessories, replacement parts and reviews below, scroll down to see them!

Questions about Fanimation FP4620SN?

Contact us for advice or more details. Our product specialists are here to help.

  • Do It Yourself: Replacing or Installing a Ceiling Fan
    Brent Holland shows you step by step how to install or replace your existing ceiling fan

Fanimation FP4620SN Zonix Modern Ceiling Fan

Modern. Clean. Beautiful. The Zonix, features three sleek, reversible wood blades and is available in satin nickel and oil-rubbed bronze.


  • 14 degree blade pitch
  • 54" blade span
  • 153 x 18 motor
  • 3 Reversible Cherry / Walnut wood blades (Included)
  • 6 " x 1" diameter down rod (Included)
  • CW40 4 speed (fan only) wall control (Included)
  • Will fit a Ceiling slope up to 30 degrees (up to 52 degrees with SCB1-52 - Sold Separately)
  • Four forward and four reverse speeds, reversing switch located on fan housing
  • CFM: 4260
  • UL Listed

Additional Fanimation Links

Our SKU: Fanimation FP4620SN

*Denotes a finish or option that has been discontinued

Fanimation FP4620SN Product Specifications

Specification Sheet
Blade Pitch 14
Blade Span 54
CFM (High) 4529
Collection Zonix
Controller Included Yes
Energy Star No
Fan Type Hanging
Finish Application Satin
Height 15.5
Light Kit Included No
Number of Blades 3
Style Modern
Suggested Room Fit Bedroom, Dining Room, Kitchen, Living Room, Office
Theme Modern
UL Listed Yes
UL Rating Dry Location
Width 11

Installation Resource Center

Whether you are installing the product yourself or hiring a professional, our installation Resource Center has everything you need to get your project done. Visit the Installation Resource Center to get started.

Fanimation FP4620SN Reviews

Rated 5 out of 5 by from Beautiful Fan Very modern looking and it moves a lot of air too. I installed it in our living room, and it matches the cherry wood and brushed nickel of our open kitchen.
Date published: 2011-06-27
  • I have 8' ceilings. I see that the downrod is 6". What is the measurement of the fan body and what is the lowest point the blades hang from the ceiling. Will this fan even work with 8' ceilings?

    A. Thank you for your question. The measurements of the Fanimation FP4620SN from the ceiling to the bottom of the fan with the 6" downrod would be 15 1/5". It could work with 8' ceilings, as long as you didn't have any one over 6'5" in your home, but it would be close. Thanks and have a great day!!!
  • Is this the cherry or walnut blades shown in this picture? Are the walnut blades darker?

    A. The Fanimation FP4620SN the cherry blades are shown in the picture, and the walnut blades are just a little darker.
  • how long are the electrical wires? I'm planning on getting a 72" downrod, are there going to be enough wires to reach the ceiling?

    A. The Fanimation FP4620SN comes with 80" of wire. Fanimation stated that this should be sufficient enough for you.
  • I want to install this fan in a room with an 11' ceiling. What length down rod would I need to have the fan extend down to 8' above the floor?

    A. We would recommend an 18" or 24" downrod.
  • If we wanted to use this fan in a room that is 8', can it be flush mounted? If not, what fan is similar to it that we could use?

    A. The Fanimation FP4620SN can be installed flush mounted with model cck8002.
  • Are lamp kits available for this fan?

    A. Yes, The Fanimation FP4620SN is compatible with Fanimation LK4620 Fan Light Kits.
  • does this fan have a compatible light fixture for purchase separately?

    A. The Fanimation FP4620SN can use the Fanimation LK4620 for a light.
  • how quiet id this fan? what is the quietest fanimation model?

    A. The Fanimation FP4620SN is quite. This type of fan doesn't have a rates suck as a bath fan or range hood that is calculated by sones. This is 4260 CFM - circulation flow per minute. This is circulating a lot of air.
  • Is there a suitable remote for this fan?

    A. Please take a look at the Fanimation C20-SW50.
  • Is this fan energy star rated?

    A. The Fanimation FP4620SN is not an energy star rated fan.
  • My ceiling are 15 ft. in the kitchen how long is the shaft?

    A. The Fanimation FP4620SN is sold with a 6" down rod. Larger down rods can be purchased separately.
  • Does this fan have a compatible light fixture?

    A. Yes, The Fanimation FP4620SN can use the Fanimation LK4620 light kit.
  • The description for the C20-SW50 remote does not list this model as one it is compatable with. Please confirm if it can be used or not.

    A. The best option for a remote is a Fanimation CRL4. An added bonus is that the item is an easy install.
  • Is this fan suitable for an 8' ceiling?


    No, the Fanimation FP4620SN is not suitable for an 8' ceiling.

Buy the Fanimation FP4620SN at Research Fanimation FP4620SN online. Find Fanimation FP4620SN features and specifications. Get the best deal by comparing the Fanimation FP4620SN today.

Recently viewed items
× Shipping Rates & Methods

The cost to ship items varies by item, shipment and shipping option.

Free Ground Shipping on Orders Over $49 *

Standard ground shipping transit time is 5-7 business days.

Free Freight Shipping on Orders Over $1500 *

Curb side delivery (also called freight or "LTL" shipping) is reserved for large, heavy, or oversized items like chandeliers, bathtubs, shower doors, etc. Items are palletized and loaded onto a large truck for shipment, and delivered to your curb by scheduled appointment. Transit time is 7-10 business days.

* For exact shipping costs, add the product(s) to your cart and enter your zip code. All offers pertain to the lower 48 states and do not include deliveries to Alaska, Hawaii or Canada.

Learn more about shipping rates and policies