Fanimation Windpointe 52" 5 Blade Ceiling Fan - Walnut Blades Included

Included Components:

• (5) Walnut Carved Wood Blades
• (1) 6" Downrod
• Pull Chain
• Canopy and Mounting Hardware

Special Features:

• On Pointe - Beautifully crafted with style and versatility in mind, the Windpointe will provide the right look for any room. Customize it with dozens of blade and lighting options to fit your décor style perfectly.
• Energy-Efficient 3-Speed Reversible AC Motor
• UL Listed for Damp Locations
• Covered by Fanimation's 1-Year Comprehensive Warranty, plus Limited Lifetime Motor Warranty
• Optional Remote and Wall Controls Available

Blade Specifications:

• Blade Span: 52"
• Blade Length: 22"
• Blade Pitch: 18°
• Number of Blades: 5
• Blades Included: Yes

Motor Specifications:

• Motor Type: AC Induction
• Number of Speeds: 3
• Reversible Motor: Yes
• CFM (On High Speed): 4649
• Voltage: 120

Have a Sloped Ceiling?:

• The Windpointe can be installed on sloped ceilings up to 30° right out of the box. For ceilings up to 52° you'll need to purchase the SCB1-52 sloped ceiling adapter and a minimum 12" downrod, both of which are offered upon adding this fan to your cart.

Have a High or Low Ceiling?:

• The Windpointe is designed for installation on standard 8 to 9 foot ceilings. If you ceiling is higher, you'll need to purchase an additional downrod, which will be offered upon adding this fan to your cart. The rule of thumb is that ceiling fans should have a minimum of 7 feet and a maximum of 9 feet of clearance between the bottom of the fan and the floor in order to circulate air efficiently. If you have a low ceiling, purchase the CCK8002 sloped ceiling kit to reduce the hanging height of your fan.

Suggested Downrod Lengths for Tall Ceilings:

• 9 Foot Ceiling: 6" - 12"
• 10 Foot Ceiling: 12" - 18"
• 11 Foot Ceiling: 18" - 24"
• 12 Foot Ceiling: 24" - 36"
• 13 Foot Ceiling: 36" - 48"
• 14 Foot Ceiling: 48" - 60"
• 15 Foot Ceiling: 60" - 72"
• For ceilings heights greater than 15 feet, you'll need to purchase the DR1-CP downrod coupler to join two downrods together.